Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.12;

import "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/access/AccessControl.sol";

import "../DaimoPay.sol";
import "../TokenUtils.sol";

/// @author Daimo, Inc
/// @notice Reference relayer contract. This is a private, untrusted relayer.
contract DaimoPayRelayer is AccessControl {
    using SafeERC20 for IERC20;

    bytes32 public constant RELAYER_EOA_ROLE = keccak256("RELAYER_EOA_ROLE");

    event SwapAndTip(
        address indexed requiredTokenIn,
        uint256 suppliedAmountIn,
        address indexed requiredTokenOut,
        uint256 swapAmountOut,
        uint256 maxPreTip,
        uint256 maxPostTip
    );

    // Enabled only within transactions. Otherwise zero.
    bytes32 private approvedSwapAndTipHash;

    // For gas efficiency, set to 1 to disable swapAndTip.
    bytes32 private constant NO_APPROVED_HASH = bytes32(uint256(1));

    constructor(address admin) {
        _grantRole(DEFAULT_ADMIN_ROLE, admin);
        _grantRole(RELAYER_EOA_ROLE, admin);
        approvedSwapAndTipHash = NO_APPROVED_HASH;
    }

    /// Add a new address that can trigger the relayer.
    /// We use multiple relayer EOAs to avoid nonce contention.
    function grantRelayerEOARole(
        address relayer
    ) public onlyRole(DEFAULT_ADMIN_ROLE) {
        _grantRole(RELAYER_EOA_ROLE, relayer);
    }

    /// Withdraws an amount of tokens from the contract to the admin.
    function withdrawAmount(
        IERC20 token,
        uint256 amount
    ) public onlyRole(DEFAULT_ADMIN_ROLE) {
        TokenUtils.transfer(token, payable(msg.sender), amount);
    }

    /// Withdraws the full balance of a token from the relayer to the admin.
    function withdrawBalance(
        IERC20 token
    ) public onlyRole(DEFAULT_ADMIN_ROLE) returns (uint256) {
        return TokenUtils.transferBalance(token, payable(msg.sender));
    }

    /// Makes a swap from requiredTokenIn.token to requiredTokenOut.token. The
    /// relayer supplies a "tip" either on the input or output side so that
    /// we get sufficient token output.
    ///
    /// Pre-tip: The relayer tips up to maxPreTip of requiredTokenIn.token so
    /// that there is sufficient input to guarantee the swap outputs enough of
    /// the output token.
    ///
    /// Post-tip: Swap with however much input token the user has provided. The
    /// relayer tips up to maxPostTip of requiredTokenOut.token so that the
    /// output amount reaches the required amount.
    function swapAndTip(
        TokenAmount calldata requiredTokenIn,
        uint256 suppliedTokenInAmount,
        TokenAmount calldata requiredTokenOut,
        uint256 maxPreTip,
        uint256 maxPostTip,
        Call calldata innerSwap
    ) external payable {
        // Check that this exact swapAndTip call was approved.
        bytes32 swapAndTipHash = keccak256(
            abi.encode(
                requiredTokenIn,
                suppliedTokenInAmount,
                requiredTokenOut,
                maxPreTip,
                maxPostTip,
                innerSwap
            )
        );
        require(approvedSwapAndTipHash == swapAndTipHash, "DPR: wrong hash");
        // Single-use
        approvedSwapAndTipHash = NO_APPROVED_HASH;

        //////////////////////////////////////////////////////////////
        // PRE-SWAP
        //////////////////////////////////////////////////////////////

        uint256 amountPreSwap = TokenUtils.getBalanceOf(
            requiredTokenOut.token,
            address(this)
        );

        // Check that the amount supplied by the user is exactly suppliedTokenIn.
        // In the case of native token input, the value should've been supplied
        // in msg.value. In the case of ERC20 input, move the tokens using
        // transferFrom.
        if (address(requiredTokenIn.token) == address(0)) {
            // Caller should have supplied the exact amount in msg.value
            require(
                requiredTokenIn.amount == msg.value,
                "DPR: wrong msg.value"
            );
            // Inner swap should not require more than the required input amount
            require(
                innerSwap.value <= requiredTokenIn.amount,
                "DPR: wrong inner swap value"
            );
        } else {
            // Transfer the supplied tokens to the contract
            TokenUtils.transferFrom({
                token: requiredTokenIn.token,
                from: msg.sender,
                to: address(this),
                amount: suppliedTokenInAmount
            });

            // Check that the tip doesn't exceed maxPreTip
            if (suppliedTokenInAmount < requiredTokenIn.amount) {
                uint256 inShortfall = requiredTokenIn.amount -
                    suppliedTokenInAmount;
                require(inShortfall <= maxPreTip, "DPR: excessive pre tip");

                uint256 balance = TokenUtils.getBalanceOf({
                    token: requiredTokenIn.token,
                    addr: address(this)
                });
                require(
                    balance >= requiredTokenIn.amount,
                    "DPR: balance less than required input"
                );
            }

            // Approve requiredTokenIn.amount even if it's greater than
            // suppliedTokenInAmount. The difference is tipped by the contract. We
            // already checked that the tip is within maxPreTip and the contract
            // has enough balance.
            if (innerSwap.to != address(0)) {
                requiredTokenIn.token.forceApprove({
                    spender: innerSwap.to,
                    value: requiredTokenIn.amount
                });
            }
        }

        //////////////////////////////////////////////////////////////
        // SWAP
        //////////////////////////////////////////////////////////////

        // Execute inner swap
        if (innerSwap.to != address(0)) {
            (bool success, ) = innerSwap.to.call{value: innerSwap.value}(
                innerSwap.data
            );
            require(success, "DPR: inner swap failed");
        }

        uint256 postSwapBalance = TokenUtils.getBalanceOf(
            requiredTokenOut.token,
            address(this)
        );
        uint256 swapAmountOut = postSwapBalance - amountPreSwap;

        //////////////////////////////////////////////////////////////
        // POST-SWAP
        //////////////////////////////////////////////////////////////

        // If we received less than required, check that the amount we need to
        // tip is within maxPostTip.
        if (swapAmountOut < requiredTokenOut.amount) {
            uint256 outShortfall = requiredTokenOut.amount - swapAmountOut;
            require(outShortfall <= maxPostTip, "DPR: excessive post tip");
            require(
                postSwapBalance >= requiredTokenOut.amount,
                "DPR: balance less than required output"
            );
        }

        // Transfer the required output tokens to the caller, tipping the
        // shortfall if needed. If there are surplus tokens from the swap, keep
        // them.
        TokenUtils.transfer(
            requiredTokenOut.token,
            payable(msg.sender),
            requiredTokenOut.amount
        );

        emit SwapAndTip({
            requiredTokenIn: address(requiredTokenIn.token),
            suppliedAmountIn: suppliedTokenInAmount,
            requiredTokenOut: address(requiredTokenOut.token),
            swapAmountOut: swapAmountOut,
            maxPreTip: maxPreTip,
            maxPostTip: maxPostTip
        });
    }

    /// Starts a new intent.
    function startIntent(
        Call[] calldata preCalls,
        DaimoPay dp,
        PayIntent calldata intent,
        IERC20[] calldata paymentTokens,
        Call[] calldata startCalls,
        bytes calldata bridgeExtraData,
        Call[] calldata postCalls,
        bytes32 swapAndTipHash
    ) public payable onlyRole(RELAYER_EOA_ROLE) {
        approvedSwapAndTipHash = swapAndTipHash;

        // Make pre-start calls
        for (uint256 i = 0; i < preCalls.length; ++i) {
            Call calldata call = preCalls[i];
            (bool success, ) = call.to.call{value: call.value}(call.data);
            require(success, "DPR: preCall failed");
        }

        dp.startIntent({
            intent: intent,
            paymentTokens: paymentTokens,
            calls: startCalls,
            bridgeExtraData: bridgeExtraData
        });

        // Make post-start calls
        for (uint256 i = 0; i < postCalls.length; ++i) {
            Call calldata call = postCalls[i];
            (bool success, ) = call.to.call{value: call.value}(call.data);
            require(success, "DPR: postCall failed");
        }

        approvedSwapAndTipHash = NO_APPROVED_HASH;
    }

    function fastFinish(
        DaimoPay dp,
        PayIntent calldata intent,
        TokenAmount calldata tokenIn,
        Call[] calldata calls
    ) public onlyRole(RELAYER_EOA_ROLE) {
        TokenUtils.transfer({
            token: tokenIn.token,
            recipient: payable(address(dp)),
            amount: tokenIn.amount
        });

        IERC20[] memory tokens = new IERC20[](1);
        tokens[0] = tokenIn.token;
        dp.fastFinishIntent({intent: intent, calls: calls, tokens: tokens});
    }

    function claimAndKeep(
        Call[] calldata preCalls,
        DaimoPay dp,
        PayIntent calldata intent,
        Call[] calldata claimCalls,
        Call[] calldata postCalls,
        bytes32 swapAndTipHash
    ) public onlyRole(RELAYER_EOA_ROLE) {
        approvedSwapAndTipHash = swapAndTipHash;

        // Make pre-claim calls
        for (uint256 i = 0; i < preCalls.length; ++i) {
            Call calldata call = preCalls[i];
            (bool success, ) = call.to.call{value: call.value}(call.data);
            require(success, "DPR: preCall failed");
        }

        dp.claimIntent({intent: intent, calls: claimCalls});

        // Make post-claim calls
        for (uint256 i = 0; i < postCalls.length; ++i) {
            Call calldata call = postCalls[i];
            (bool success, ) = call.to.call{value: call.value}(call.data);
            require(success, "DPR: postCall failed");
        }

        approvedSwapAndTipHash = NO_APPROVED_HASH;
    }

    receive() external payable {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.2.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            // bubble errors
            if iszero(success) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }
        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/AccessControl.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "./IAccessControl.sol";
import {Context} from "../utils/Context.sol";
import {ERC165} from "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }

    mapping(bytes32 role => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        return _roles[role].hasRole[account];
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }

        _revokeRole(role, callerConfirmation);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        if (!hasRole(role, account)) {
            _roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Attempts to revoke `role` from `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        if (hasRole(role, account)) {
            _roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.12;

import "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";
import "openzeppelin-contracts/contracts/utils/ReentrancyGuard.sol";

import "./DaimoPayBridger.sol";
import "./DaimoPayExecutor.sol";
import "./PayIntentFactory.sol";
import "./TokenUtils.sol";

// A Daimo Pay transfer has 4 steps:
// 1. Alice sends (tokenIn, amountIn) to the intent address on chain A. This is
//    a simple erc20 transfer.
// 2. Relayer swaps tokenIn to bridgeTokenIn and initiates the bridge using
//    startIntent. The intent commits to a destination bridgeTokenOut, and the
//    bridger guarantees this amount will show up on chain B (or reverts if the
//    amount of bridgeTokenIn is insufficient).
// 3. Relayer immediately calls fastFinishIntent on chain B, paying Bob.
// 4. Finally, the slow bridge transfer arrives on chain B later, and the
//    relayer can call claimIntent.
// For simplicity, a same-chain Daimo Pay transfer follows the same steps.
// Instead of swap+bridge, startIntent only swaps and verifies correct output.
// FastFinish remains optional but is unnecessary. Claim completes the intent.

/// @author Daimo, Inc
/// @custom:security-contact [email protected]
/// @notice Enables fast cross-chain transfers with optimistic intents.
/// WARNING: Never approve tokens directly to this contract. Never transfer
/// tokens to this contract as a standalone transaction. Such tokens can be
/// stolen by anyone. Instead:
/// - Users should only interact by sending funds to an intent address.
/// - Relayers should transfer funds and call this contract atomically via their
///   own contracts.
///
/// @dev Allows optimistic fast intents. Alice initiates a transfer by calling
/// `startIntent` on chain A. After the bridging delay (e.g. 10+ min for CCTP),
/// funds arrive at the intent address deployed on chain B. Bob (or anyone) can
/// call `claimIntent` on chain B to finish her intent.
///
/// Alternatively, immediately after the first call, a relayer can call
/// `fastFinishIntent` to finish Alice's intent immediately. Later, when the
/// funds arrive from the bridge, the relayer will call `claimIntent` to get
/// repaid for their fast-finish.
contract DaimoPay is ReentrancyGuard {
    using SafeERC20 for IERC20;

    address constant ADDR_MAX = 0xFFfFfFffFFfffFFfFFfFFFFFffFFFffffFfFFFfF;

    /// Efficiently generates + deploys CREATE2 intent addresses.
    PayIntentFactory public immutable intentFactory;
    /// Contract that executes arbitrary contract calls on behalf of the
    /// DaimoPay escrow contract.
    DaimoPayExecutor public immutable executor;

    /// On the source chain, record intents that have been sent.
    mapping(address intentAddr => bool) public intentSent;
    /// On the destination chain, record the status of intents:
    /// - address(0) = not finished.
    /// - Relayer address = fast-finished, awaiting claim to repay relayer.
    /// - ADDR_MAX = claimed. any additional funds received are refunded.
    mapping(address intentAddr => address) public intentToRecipient;

    /// Intent initiated on chain A
    event Start(address indexed intentAddr, PayIntent intent);

    /// Intent completed ~immediately on chain B
    event FastFinish(address indexed intentAddr, address indexed newRecipient);

    /// Intent settled later, once the underlying bridge transfer completes.
    /// Record the final recipient of the claim:
    /// - If fast finished, the relayer.
    /// - Otherwise, the original recipient (Bob).
    event Claim(address indexed intentAddr, address indexed finalRecipient);

    /// When the intent is completed, emit this event. `success=false` indicates
    /// that the final call reverted, and funds were refunded to refundAddr.
    event IntentFinished(
        address indexed intentAddr,
        address indexed destinationAddr,
        bool indexed success,
        PayIntent intent
    );

    /// When a double-paid intent is refunded, emit this event
    event IntentRefunded(
        address indexed intentAddr,
        address indexed refundAddr,
        IERC20[] tokens,
        uint256[] amounts,
        PayIntent intent
    );

    constructor(PayIntentFactory _intentFactory) {
        intentFactory = _intentFactory;
        executor = new DaimoPayExecutor(address(this));
    }

    /// Starts an intent, bridging to the destination chain if necessary.
    function startIntent(
        PayIntent calldata intent,
        IERC20[] calldata paymentTokens,
        Call[] calldata calls,
        bytes calldata bridgeExtraData
    ) public nonReentrant {
        require(
            block.timestamp < intent.expirationTimestamp,
            "DP: intent expired"
        );

        PayIntentContract intentContract = intentFactory.createIntent(intent);

        // Ensure we don't reuse a nonce in the case where Alice is sending to
        // same destination with the same nonce multiple times.
        require(!intentSent[address(intentContract)], "DP: already sent");
        // Can't call startIntent if the intent has already been claimed.
        require(
            intentToRecipient[address(intentContract)] != ADDR_MAX,
            "DP: already claimed"
        );
        // Mark the intent as sent
        intentSent[address(intentContract)] = true;

        // Transfer from intent contract to the executor contract to run
        // relayer-provided calls.
        intentContract.sendTokens({
            intent: intent,
            tokens: paymentTokens,
            recipient: payable(address(executor))
        });

        if (intent.toChainId == block.chainid) {
            // Same chain. Swap the tokens to one of the bridgeTokenOutOptions
            // and send them back to the intent contract for later claimIntent.

            // Run arbitrary calls provided by the relayer. These will generally
            // approve the swap contract and swap if necessary.
            // The executor contract checks that at least one of the
            // bridgeTokenOutOptions is present. Any surplus tokens are given
            // to the caller.
            executor.execute({
                calls: calls,
                expectedOutput: intent.bridgeTokenOutOptions,
                recipient: payable(address(intentContract)),
                surplusRecipient: payable(msg.sender)
            });
        } else {
            // Different chains. Get the input token and amount required to
            // initiate bridging
            IDaimoPayBridger bridger = intent.bridger;
            (address bridgeTokenIn, uint256 inAmount) = bridger
                .getBridgeTokenIn({
                    toChainId: intent.toChainId,
                    bridgeTokenOutOptions: intent.bridgeTokenOutOptions
                });

            // Run arbitrary calls provided by the relayer. These will generally
            // approve the swap contract and swap if necessary.
            // The executor contract checks that the output is sufficient. Any
            // surplus tokens are given to the caller.
            TokenAmount[] memory expectedOutput = new TokenAmount[](1);
            expectedOutput[0] = TokenAmount({
                token: IERC20(bridgeTokenIn),
                amount: inAmount
            });
            executor.execute({
                calls: calls,
                expectedOutput: expectedOutput,
                recipient: payable(address(this)),
                surplusRecipient: payable(msg.sender)
            });

            // Approve bridger and initiate bridging
            IERC20(bridgeTokenIn).forceApprove({
                spender: address(bridger),
                value: inAmount
            });
            bridger.sendToChain({
                toChainId: intent.toChainId,
                toAddress: address(intentContract),
                bridgeTokenOutOptions: intent.bridgeTokenOutOptions,
                extraData: bridgeExtraData
            });
        }

        emit Start({intentAddr: address(intentContract), intent: intent});
    }

    /// The relayer calls this function to complete an intent immediately on
    /// the destination chain.
    ///
    /// The relayer must call this function and transfer the necessary tokens to
    /// this contract in the same transaction. This function executes arbitrary
    /// calls specified by the relayer, e.g. to convert the transferred tokens
    /// into the required amount of finalCallToken.
    ///
    /// Later, when the slower bridge transfer arrives, the relayer will be able
    /// to claim the bridged tokens.
    function fastFinishIntent(
        PayIntent calldata intent,
        Call[] calldata calls,
        IERC20[] calldata tokens
    ) public nonReentrant {
        require(intent.toChainId == block.chainid, "DP: wrong chain");
        require(
            block.timestamp < intent.expirationTimestamp,
            "DP: intent expired"
        );

        // Calculate intent address
        address intentAddr = intentFactory.getIntentAddress(intent);

        // Optimistic fast finish is only for transfers which haven't already
        // been fastFinished or claimed.
        require(
            intentToRecipient[intentAddr] == address(0),
            "DP: already finished"
        );
        // Record relayer as new recipient when the bridged tokens arrive
        intentToRecipient[intentAddr] = msg.sender;

        // Transfer tokens to the executor contract to run relayer-provided
        // calls in _finishIntent.
        uint256 n = tokens.length;
        for (uint256 i = 0; i < n; ++i) {
            TokenUtils.transferBalance({
                token: tokens[i],
                recipient: payable(address(executor))
            });
        }

        // Finish the intent and return any leftover tokens to the caller
        _finishIntent({intentAddr: intentAddr, intent: intent, calls: calls});

        emit FastFinish({intentAddr: intentAddr, newRecipient: msg.sender});
    }

    /// Completes an intent, claiming funds. The bridge transfer must already
    /// have been completed--tokens are already in the intent contract.
    ///
    /// If FastFinish happened for this intent, then the recipient is the
    /// relayer who fastFinished the intent. Otherwise, the recipient remains
    /// the original address.
    function claimIntent(
        PayIntent calldata intent,
        Call[] calldata calls
    ) public nonReentrant {
        require(intent.toChainId == block.chainid, "DP: wrong chain");
        require(
            block.timestamp < intent.expirationTimestamp,
            "DP: intent expired"
        );

        PayIntentContract intentContract = intentFactory.createIntent(intent);

        // Check the recipient for this intent.
        address recipient = intentToRecipient[address(intentContract)];
        // If intent is double-paid after it has already been claimed, then
        // the recipient should call refundIntent to get their funds back.
        require(recipient != ADDR_MAX, "DP: already claimed");
        // Mark intent as claimed
        intentToRecipient[address(intentContract)] = ADDR_MAX;

        if (recipient == address(0)) {
            // No relayer showed up, so just complete the intent.
            recipient = intent.finalCall.to;

            // Send tokens from the intent contract to the executor contract
            // to run relayer-provided calls in _finishIntent.
            // The intent contract will check that sufficient bridge tokens
            // were received.
            intentContract.checkBalanceAndSendTokens({
                intent: intent,
                tokenAmounts: intent.bridgeTokenOutOptions,
                recipient: payable(address(executor))
            });

            // Complete the intent and return any leftover tokens to the caller
            _finishIntent({
                intentAddr: address(intentContract),
                intent: intent,
                calls: calls
            });
        } else {
            // Otherwise, the relayer fastFinished the intent. Repay them.
            // The intent contract will check that sufficient bridge tokens
            // were received.
            intentContract.checkBalanceAndSendTokens({
                intent: intent,
                tokenAmounts: intent.bridgeTokenOutOptions,
                recipient: payable(recipient)
            });
        }

        emit Claim({
            intentAddr: address(intentContract),
            finalRecipient: recipient
        });
    }

    /// Refund a double-paid intent. On the source chain, refund only if the
    /// intent has already been started. On the destination chain, refund only
    /// if the intent has already been claimed.
    function refundIntent(
        PayIntent calldata intent,
        IERC20[] calldata tokens
    ) public nonReentrant {
        PayIntentContract intentContract = intentFactory.createIntent(intent);
        address intentAddr = address(intentContract);

        bool expired = block.timestamp >= intent.expirationTimestamp;

        if (intent.toChainId == block.chainid) {
            // Refund only if already claimed or the intent has expired.
            bool claimed = intentToRecipient[address(intentContract)] ==
                ADDR_MAX;
            require(claimed || expired, "DP: not claimed");
        } else {
            // Refund only if already started or the intent has expired.
            require(intentSent[intentAddr] || expired, "DP: not started");
        }

        // Send tokens directly from intent contract to the refund address.
        uint256[] memory amounts = intentContract.sendTokens({
            intent: intent,
            tokens: tokens,
            recipient: payable(intent.refundAddress)
        });

        emit IntentRefunded({
            intentAddr: intentAddr,
            refundAddr: intent.refundAddress,
            tokens: tokens,
            amounts: amounts,
            intent: intent
        });
    }

    /// Execute the calls provided by the relayer and check that there is
    /// sufficient finalCallToken. Then, if the intent has a finalCall, make
    /// the intent call. Otherwise, transfer the token to the final address.
    /// Any surplus tokens are given to the caller.
    /// This function assumes that tokens are already transferred to the
    /// executor contract before being called.
    function _finishIntent(
        address intentAddr,
        PayIntent calldata intent,
        Call[] calldata calls
    ) internal {
        // Run arbitrary calls provided by the relayer. These will generally
        // approve the swap contract and swap if necessary. Any surplus tokens
        // are given to the caller.
        TokenAmount[] memory finalCallAmount = new TokenAmount[](1);
        finalCallAmount[0] = intent.finalCallToken;
        executor.execute({
            calls: calls,
            expectedOutput: finalCallAmount,
            recipient: payable(address(this)),
            surplusRecipient: payable(msg.sender)
        });

        bool success;
        if (intent.finalCall.data.length > 0) {
            // If the intent is a call, approve the final token and make the call
            success = executor.executeFinalCall({
                finalCall: intent.finalCall,
                finalCallToken: intent.finalCallToken
            });
        } else {
            // If the final call is a transfer, transfer the token.
            success = TokenUtils.tryTransfer(
                intent.finalCallToken.token,
                payable(intent.finalCall.to),
                intent.finalCallToken.amount
            );
        }

        // If the call fails, transfer the token to the refund address
        if (!success) {
            TokenUtils.transfer({
                token: intent.finalCallToken.token,
                recipient: payable(intent.refundAddress),
                amount: intent.finalCallToken.amount
            });
        }

        emit IntentFinished({
            intentAddr: intentAddr,
            destinationAddr: intent.finalCall.to,
            success: success,
            intent: intent
        });
    }

    receive() external payable {}
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.12;

import "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";

/// Asset amount, e.g. $100 USDC or 0.1 ETH
struct TokenAmount {
    /// Zero address = native asset, e.g. ETH
    IERC20 token;
    uint256 amount;
}

/// Utility functions that work for both ERC20 and native tokens.
library TokenUtils {
    using SafeERC20 for IERC20;

    /// Returns ERC20 or ETH balance.
    function getBalanceOf(
        IERC20 token,
        address addr
    ) internal view returns (uint256) {
        if (address(token) == address(0)) {
            return addr.balance;
        } else {
            return token.balanceOf(addr);
        }
    }

    /// Approves a token transfer.
    function approve(IERC20 token, address spender, uint256 amount) internal {
        if (address(token) != address(0)) {
            token.forceApprove({spender: spender, value: amount});
        } // Do nothing for native token.
    }

    /// Sends an ERC20 or ETH transfer. For ETH, verify call success.
    function transfer(
        IERC20 token,
        address payable recipient,
        uint256 amount
    ) internal {
        if (address(token) != address(0)) {
            token.safeTransfer({to: recipient, value: amount});
        } else {
            // Native token transfer
            (bool success, ) = recipient.call{value: amount}("");
            require(success, "TokenUtils: ETH transfer failed");
        }
    }

    /// Sends an ERC20 or ETH transfer. Returns true if successful.
    function tryTransfer(
        IERC20 token,
        address recipient,
        uint256 amount
    ) internal returns (bool) {
        if (address(token) != address(0)) {
            return token.trySafeTransfer({to: recipient, value: amount});
        } else {
            (bool success, ) = recipient.call{value: amount}("");
            return success;
        }
    }

    /// Sends an ERC20 transfer.
    function transferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        require(
            address(token) != address(0),
            "TokenUtils: ETH transferFrom must be caller"
        );
        token.safeTransferFrom({from: from, to: to, value: amount});
    }

    /// Sends any token balance in the contract to the recipient.
    function transferBalance(
        IERC20 token,
        address payable recipient
    ) internal returns (uint256) {
        uint256 balance = getBalanceOf({token: token, addr: address(this)});
        if (balance > 0) {
            transfer({token: token, recipient: recipient, amount: balance});
        }
        return balance;
    }

    /// Check that the address has enough of at least one of the tokenAmounts.
    /// Returns the index of the first token that has sufficient balance, or
    /// the length of the tokenAmounts array if no token has sufficient balance.
    function checkBalance(
        TokenAmount[] calldata tokenAmounts
    ) internal view returns (uint256) {
        uint256 n = tokenAmounts.length;
        for (uint256 i = 0; i < n; ++i) {
            TokenAmount calldata tokenAmount = tokenAmounts[i];
            uint256 balance = getBalanceOf({
                token: tokenAmount.token,
                addr: address(this)
            });
            if (balance >= tokenAmount.amount) {
                return i;
            }
        }
        return n;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/IERC1363.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";

/**
 * @title IERC1363
 * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
 *
 * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
 * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
 */
interface IERC1363 is IERC20, IERC165 {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
     */

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @param data Additional data with no specified format, sent in call to `spender`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (access/IAccessControl.sol)

pragma solidity ^0.8.20;

/**
 * @dev External interface of AccessControl declared to support ERC-165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted to signal this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).
     * Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
 * consider using {ReentrancyGuardTransient} instead.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.12;

import "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";

import "./TokenUtils.sol";
import "./interfaces/IDaimoPayBridger.sol";

/// @author Daimo, Inc
/// @custom:security-contact [email protected]
///
/// @notice Bridges assets from the current chain to a supported destination
/// chain. Multiplexes between bridging protocols by destination chain.
contract DaimoPayBridger is IDaimoPayBridger {
    using SafeERC20 for IERC20;

    /// Map chainId to IDaimoPayBridger implementation.
    mapping(uint256 chainId => IDaimoPayBridger bridger)
        public chainIdToBridger;

    /// Specify the bridger implementation to use for each chain.
    constructor(
        uint256[] memory _toChainIds,
        IDaimoPayBridger[] memory _bridgers
    ) {
        uint256 n = _toChainIds.length;
        require(n == _bridgers.length, "DPB: wrong bridgers length");
        for (uint256 i = 0; i < n; ++i) {
            chainIdToBridger[_toChainIds[i]] = _bridgers[i];
        }
    }

    // ----- BRIDGER FUNCTIONS -----

    /// Get the input token and amount required to achieve one of the given
    /// output options on a given chain.
    function getBridgeTokenIn(
        uint256 toChainId,
        TokenAmount[] calldata bridgeTokenOutOptions
    ) external view returns (address bridgeTokenIn, uint256 inAmount) {
        IDaimoPayBridger bridger = chainIdToBridger[toChainId];
        require(address(bridger) != address(0), "DPB: missing bridger");

        return bridger.getBridgeTokenIn(toChainId, bridgeTokenOutOptions);
    }

    /// Initiate a bridge to a supported destination chain.
    function sendToChain(
        uint256 toChainId,
        address toAddress,
        TokenAmount[] calldata bridgeTokenOutOptions,
        bytes calldata extraData
    ) public {
        require(toChainId != block.chainid, "DPB: same chain");

        // Get the specific bridger implementation for toChain (CCTP, Across,
        // Axelar, etc)
        IDaimoPayBridger bridger = chainIdToBridger[toChainId];
        require(address(bridger) != address(0), "DPB: missing bridger");

        // Move input token from caller to this contract and initiate bridging.
        (address bridgeTokenIn, uint256 inAmount) = this.getBridgeTokenIn({
            toChainId: toChainId,
            bridgeTokenOutOptions: bridgeTokenOutOptions
        });
        require(bridgeTokenIn != address(0), "DPB: missing bridge token in");

        IERC20(bridgeTokenIn).safeTransferFrom({
            from: msg.sender,
            to: address(this),
            value: inAmount
        });

        // Approve tokens to the bridge contract and intiate bridging.
        IERC20(bridgeTokenIn).forceApprove({
            spender: address(bridger),
            value: inAmount
        });
        bridger.sendToChain({
            toChainId: toChainId,
            toAddress: toAddress,
            bridgeTokenOutOptions: bridgeTokenOutOptions,
            extraData: extraData
        });
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.12;

import "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";
import "openzeppelin-contracts/contracts/utils/ReentrancyGuard.sol";

import "./TokenUtils.sol";

/// Represents a contract call.
struct Call {
    /// Address of the contract to call.
    address to;
    /// Native token amount for call, or 0
    uint256 value;
    /// Calldata for call
    bytes data;
}

/// @author Daimo, Inc
/// @custom:security-contact [email protected]
/// @notice This contract is used to execute arbitrary contract calls on behalf
/// of the DaimoPay escrow contract.
/// WARNING: Never approve tokens directly to this contract. Never transfer
/// tokens to this contract. Such tokens can be stolen by anyone. All
/// interactions with this contract should be done via the DaimoPay contract.
contract DaimoPayExecutor is ReentrancyGuard {
    using SafeERC20 for IERC20;

    /// The only address that is allowed to call the `execute` function.
    address public immutable escrow;

    constructor(address _escrow) {
        escrow = _escrow;
    }

    /// Execute arbitrary calls. Revert if any fail.
    /// Check that at least one of the expectedOutput tokens is present. Assumes
    /// that exactly one token is present and transfers it to the recipient.
    /// Returns any surplus tokens to the surplus recipient.
    function execute(
        Call[] calldata calls,
        TokenAmount[] calldata expectedOutput,
        address payable recipient,
        address payable surplusRecipient
    ) external nonReentrant {
        require(msg.sender == escrow, "DPCE: only escrow");

        // Execute provided calls.
        uint256 callsLength = calls.length;
        for (uint256 i = 0; i < callsLength; ++i) {
            Call calldata call = calls[i];
            (bool success, ) = call.to.call{value: call.value}(call.data);
            require(success, "DPCE: call failed");
        }

        /// Check that at least one of the expectedOutput tokens is present
        /// with enough balance.
        uint256 outputIndex = TokenUtils.checkBalance({
            tokenAmounts: expectedOutput
        });
        require(
            outputIndex < expectedOutput.length,
            "DPCE: insufficient output"
        );

        // Transfer the expected amount of the token to the recipient.
        TokenUtils.transfer({
            token: expectedOutput[outputIndex].token,
            recipient: recipient,
            amount: expectedOutput[outputIndex].amount
        });

        // Transfer any surplus tokens to the surplus recipient.
        TokenUtils.transferBalance({
            token: expectedOutput[outputIndex].token,
            recipient: surplusRecipient
        });
    }

    /// Execute a final call. Approve the final token and make the call.
    /// Return whether the call succeeded.
    function executeFinalCall(
        Call calldata finalCall,
        TokenAmount calldata finalCallToken
    ) external nonReentrant returns (bool success) {
        require(msg.sender == escrow, "DPCE: only escrow");

        // Approve the final call token to the final call contract.
        TokenUtils.approve({
            token: finalCallToken.token,
            spender: address(finalCall.to),
            amount: finalCallToken.amount
        });

        // Then, execute the final call.
        (success, ) = finalCall.to.call{value: finalCall.value}(finalCall.data);
    }

    /// Accept native-token (eg ETH) inputs
    receive() external payable {}
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.12;

import "openzeppelin-contracts/contracts/utils/Create2.sol";
import "openzeppelin-contracts/contracts/proxy/ERC1967/ERC1967Proxy.sol";

import "./PayIntent.sol";

/// @author Daimo, Inc
/// @custom:security-contact [email protected]
/// @notice Factory for intent addresses.
contract PayIntentFactory {
    PayIntentContract public immutable intentImpl;

    constructor() {
        intentImpl = new PayIntentContract();
    }

    /// Deploy a proxy for the intent contract implementation to the CREATE2
    /// address for the given intent.
    function createIntent(
        PayIntent calldata intent
    ) public returns (PayIntentContract ret) {
        address intentAddr = getIntentAddress(intent);
        if (intentAddr.code.length > 0) {
            // Handling this case allows eg. start+claim in a single tx.
            // This allows more efficient relaying & easier unit testing.
            // See https://github.com/foundry-rs/foundry/issues/8485
            return PayIntentContract(payable(intentAddr));
        }
        ret = PayIntentContract(
            payable(
                address(
                    new ERC1967Proxy{salt: bytes32(0)}(
                        address(intentImpl),
                        abi.encodeCall(
                            PayIntentContract.initialize,
                            (calcIntentHash(intent))
                        )
                    )
                )
            )
        );
    }

    /// Compute the deterministic CREATE2 address of the intent contract for
    /// the given intent.
    function getIntentAddress(
        PayIntent calldata intent
    ) public view returns (address) {
        return
            Create2.computeAddress(
                0,
                keccak256(
                    abi.encodePacked(
                        type(ERC1967Proxy).creationCode,
                        abi.encode(
                            address(intentImpl),
                            abi.encodeCall(
                                PayIntentContract.initialize,
                                (calcIntentHash(intent))
                            )
                        )
                    )
                )
            );
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.12;

import "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";

import "../TokenUtils.sol";

/// @author Daimo, Inc
/// @custom:security-contact [email protected]
/// @notice Bridges assets. Specifically, it lets any relayer initiate a bridge
/// transaction to another chain.
interface IDaimoPayBridger {
    /// Emitted when a bridge transaction is initiated
    event BridgeInitiated(
        address fromAddress,
        address fromToken,
        uint256 fromAmount,
        uint256 toChainId,
        address toAddress,
        address toToken,
        uint256 toAmount
    );

    /// Determine the input token and amount required to achieve one of the
    /// given output options on a given chain.
    function getBridgeTokenIn(
        uint256 toChainId,
        TokenAmount[] memory bridgeTokenOutOptions
    ) external view returns (address bridgeTokenIn, uint256 inAmount);

    /// Initiate a bridge. Guarantee that one of the bridge token options
    /// (bridgeTokenOut, outAmount) shows up at toAddress on toChainId.
    /// Otherwise, revert.
    function sendToChain(
        uint256 toChainId,
        address toAddress,
        TokenAmount[] calldata bridgeTokenOutOptions,
        bytes calldata extraData
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Create2.sol)

pragma solidity ^0.8.20;

import {Errors} from "./Errors.sol";

/**
 * @dev Helper to make usage of the `CREATE2` EVM opcode easier and safer.
 * `CREATE2` can be used to compute in advance the address where a smart
 * contract will be deployed, which allows for interesting new mechanisms known
 * as 'counterfactual interactions'.
 *
 * See the https://eips.ethereum.org/EIPS/eip-1014#motivation[EIP] for more
 * information.
 */
library Create2 {
    /**
     * @dev There's no code to deploy.
     */
    error Create2EmptyBytecode();

    /**
     * @dev Deploys a contract using `CREATE2`. The address where the contract
     * will be deployed can be known in advance via {computeAddress}.
     *
     * The bytecode for a contract can be obtained from Solidity with
     * `type(contractName).creationCode`.
     *
     * Requirements:
     *
     * - `bytecode` must not be empty.
     * - `salt` must have not been used for `bytecode` already.
     * - the factory must have a balance of at least `amount`.
     * - if `amount` is non-zero, `bytecode` must have a `payable` constructor.
     */
    function deploy(uint256 amount, bytes32 salt, bytes memory bytecode) internal returns (address addr) {
        if (address(this).balance < amount) {
            revert Errors.InsufficientBalance(address(this).balance, amount);
        }
        if (bytecode.length == 0) {
            revert Create2EmptyBytecode();
        }
        assembly ("memory-safe") {
            addr := create2(amount, add(bytecode, 0x20), mload(bytecode), salt)
            // if no address was created, and returndata is not empty, bubble revert
            if and(iszero(addr), not(iszero(returndatasize()))) {
                let p := mload(0x40)
                returndatacopy(p, 0, returndatasize())
                revert(p, returndatasize())
            }
        }
        if (addr == address(0)) {
            revert Errors.FailedDeployment();
        }
    }

    /**
     * @dev Returns the address where a contract will be stored if deployed via {deploy}. Any change in the
     * `bytecodeHash` or `salt` will result in a new destination address.
     */
    function computeAddress(bytes32 salt, bytes32 bytecodeHash) internal view returns (address) {
        return computeAddress(salt, bytecodeHash, address(this));
    }

    /**
     * @dev Returns the address where a contract will be stored if deployed via {deploy} from a contract located at
     * `deployer`. If `deployer` is this contract's address, returns the same value as {computeAddress}.
     */
    function computeAddress(bytes32 salt, bytes32 bytecodeHash, address deployer) internal pure returns (address addr) {
        assembly ("memory-safe") {
            let ptr := mload(0x40) // Get free memory pointer

            // |                   | ↓ ptr ...  ↓ ptr + 0x0B (start) ...  ↓ ptr + 0x20 ...  ↓ ptr + 0x40 ...   |
            // |-------------------|---------------------------------------------------------------------------|
            // | bytecodeHash      |                                                        CCCCCCCCCCCCC...CC |
            // | salt              |                                      BBBBBBBBBBBBB...BB                   |
            // | deployer          | 000000...0000AAAAAAAAAAAAAAAAAAA...AA                                     |
            // | 0xFF              |            FF                                                             |
            // |-------------------|---------------------------------------------------------------------------|
            // | memory            | 000000...00FFAAAAAAAAAAAAAAAAAAA...AABBBBBBBBBBBBB...BBCCCCCCCCCCCCC...CC |
            // | keccak(start, 85) |            ↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑ |

            mstore(add(ptr, 0x40), bytecodeHash)
            mstore(add(ptr, 0x20), salt)
            mstore(ptr, deployer) // Right-aligned with 12 preceding garbage bytes
            let start := add(ptr, 0x0b) // The hashed data starts at the final garbage byte which we will set to 0xff
            mstore8(start, 0xff)
            addr := and(keccak256(start, 85), 0xffffffffffffffffffffffffffffffffffffffff)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.2.0) (proxy/ERC1967/ERC1967Proxy.sol)

pragma solidity ^0.8.22;

import {Proxy} from "../Proxy.sol";
import {ERC1967Utils} from "./ERC1967Utils.sol";

/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[ERC-1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `implementation`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `implementation`. This will typically be an
     * encoded function call, and allows initializing the storage of the proxy like a Solidity constructor.
     *
     * Requirements:
     *
     * - If `data` is empty, `msg.value` must be zero.
     */
    constructor(address implementation, bytes memory _data) payable {
        ERC1967Utils.upgradeToAndCall(implementation, _data);
    }

    /**
     * @dev Returns the current implementation address.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by ERC-1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function _implementation() internal view virtual override returns (address) {
        return ERC1967Utils.getImplementation();
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.12;

import "openzeppelin-contracts/contracts/proxy/utils/Initializable.sol";
import "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";
import "openzeppelin-contracts/contracts/utils/ReentrancyGuard.sol";

import {Call} from "./DaimoPayExecutor.sol";
import "./TokenUtils.sol";
import "./interfaces/IDaimoPayBridger.sol";

/// Represents an intended call: "make X of token Y show up on chain Z,
/// then [optionally] use it to do an arbitrary contract call".
struct PayIntent {
    /// Intent only executes on given target chain.
    uint256 toChainId;
    /// Possible output tokens after bridging to the destination chain.
    /// Currently, native token is not supported as a bridge token output.
    TokenAmount[] bridgeTokenOutOptions;
    /// Expected token amount after swapping on the destination chain.
    TokenAmount finalCallToken;
    /// Contract call to execute on the destination chain. If finalCall.data is
    /// empty, the tokens are transferred to finalCall.to. Otherwise, (token,
    /// amount) is approved to finalCall.to and finalCall.to is called with
    /// finalCall.data and finalCall.value.
    Call finalCall;
    /// Escrow contract. All calls are made through this contract.
    address payable escrow;
    /// Bridger contract.
    IDaimoPayBridger bridger;
    /// Address to refund tokens if call fails, or zero.
    address refundAddress;
    /// Nonce. PayIntent receiving addresses are one-time use.
    uint256 nonce;
    /// Timestamp after which intent expires and can be refunded
    uint256 expirationTimestamp;
}

/// Calculates the intent hash of a PayIntent struct.
function calcIntentHash(PayIntent calldata intent) pure returns (bytes32) {
    return keccak256(abi.encode(intent));
}

/// @author Daimo, Inc
/// @custom:security-contact [email protected]
/// @notice This is an ephemeral intent contract. Any supported tokens sent to
/// this address on any supported chain are forwarded, via a combination of
/// bridging and swapping, into a specified call on a destination chain.
contract PayIntentContract is Initializable, ReentrancyGuard {
    using SafeERC20 for IERC20;

    /// Save gas by minimizing storage to a single word. This makes intents
    /// usable on L1. intentHash = keccak(abi.encode(PayIntent))
    bytes32 intentHash;

    /// Runs at deploy time. Singleton implementation contract = no init,
    /// no state. All other methods are called via proxy.
    constructor() {
        _disableInitializers();
    }

    function initialize(bytes32 _intentHash) public initializer {
        intentHash = _intentHash;
    }

    /// Send tokens to a recipient.
    function sendTokens(
        PayIntent calldata intent,
        IERC20[] calldata tokens,
        address payable recipient
    ) public nonReentrant returns (uint256[] memory amounts) {
        require(calcIntentHash(intent) == intentHash, "PI: intent");
        require(msg.sender == intent.escrow, "PI: only escrow");

        uint256 n = tokens.length;
        amounts = new uint256[](n);
        // Send tokens to recipient
        for (uint256 i = 0; i < n; ++i) {
            amounts[i] = TokenUtils.transferBalance({
                token: tokens[i],
                recipient: recipient
            });
        }
    }

    /// Check that at least one of the token amounts is present. Assumes exactly
    /// one token is present, then sends the token to a recipient.
    function checkBalanceAndSendTokens(
        PayIntent calldata intent,
        TokenAmount[] calldata tokenAmounts,
        address payable recipient
    ) public nonReentrant {
        require(calcIntentHash(intent) == intentHash, "PI: intent");
        require(msg.sender == intent.escrow, "PI: only escrow");

        // Check that at least one of the token amounts is present.
        uint256 tokenIndex = TokenUtils.checkBalance({
            tokenAmounts: tokenAmounts
        });
        require(tokenIndex < tokenAmounts.length, "PI: insufficient balance");

        // Transfer the token amount to the recipient.
        TokenUtils.transfer({
            token: tokenAmounts[tokenIndex].token,
            recipient: recipient,
            amount: tokenAmounts[tokenIndex].amount
        });
    }

    /// Accept native-token (eg ETH) inputs
    receive() external payable {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of common custom errors used in multiple contracts
 *
 * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.
 * It is recommended to avoid relying on the error API for critical functionality.
 *
 * _Available since v5.1._
 */
library Errors {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error InsufficientBalance(uint256 balance, uint256 needed);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedCall();

    /**
     * @dev The deployment failed.
     */
    error FailedDeployment();

    /**
     * @dev A necessary precompile is missing.
     */
    error MissingPrecompile(address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/Proxy.sol)

pragma solidity ^0.8.20;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }

    /**
     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback
     * function and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.2.0) (proxy/ERC1967/ERC1967Utils.sol)

pragma solidity ^0.8.22;

import {IBeacon} from "../beacon/IBeacon.sol";
import {IERC1967} from "../../interfaces/IERC1967.sol";
import {Address} from "../../utils/Address.sol";
import {StorageSlot} from "../../utils/StorageSlot.sol";

/**
 * @dev This library provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[ERC-1967] slots.
 */
library ERC1967Utils {
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev The `implementation` of the proxy is invalid.
     */
    error ERC1967InvalidImplementation(address implementation);

    /**
     * @dev The `admin` of the proxy is invalid.
     */
    error ERC1967InvalidAdmin(address admin);

    /**
     * @dev The `beacon` of the proxy is invalid.
     */
    error ERC1967InvalidBeacon(address beacon);

    /**
     * @dev An upgrade function sees `msg.value > 0` that may be lost.
     */
    error ERC1967NonPayable();

    /**
     * @dev Returns the current implementation address.
     */
    function getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the ERC-1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        if (newImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(newImplementation);
        }
        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Performs implementation upgrade with additional setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) internal {
        _setImplementation(newImplementation);
        emit IERC1967.Upgraded(newImplementation);

        if (data.length > 0) {
            Address.functionDelegateCall(newImplementation, data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by ERC-1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the ERC-1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        if (newAdmin == address(0)) {
            revert ERC1967InvalidAdmin(address(0));
        }
        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {IERC1967-AdminChanged} event.
     */
    function changeAdmin(address newAdmin) internal {
        emit IERC1967.AdminChanged(getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is the keccak-256 hash of "eip1967.proxy.beacon" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Returns the current beacon.
     */
    function getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the ERC-1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        if (newBeacon.code.length == 0) {
            revert ERC1967InvalidBeacon(newBeacon);
        }

        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;

        address beaconImplementation = IBeacon(newBeacon).implementation();
        if (beaconImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(beaconImplementation);
        }
    }

    /**
     * @dev Change the beacon and trigger a setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-BeaconUpgraded} event.
     *
     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since
     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for
     * efficiency.
     */
    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {
        _setBeacon(newBeacon);
        emit IERC1967.BeaconUpgraded(newBeacon);

        if (data.length > 0) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract
     * if an upgrade doesn't perform an initialization call.
     */
    function _checkNonPayable() private {
        if (msg.value > 0) {
            revert ERC1967NonPayable();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reinitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.
     *
     * NOTE: Consider following the ERC-7201 formula to derive storage locations.
     */
    function _initializableStorageSlot() internal pure virtual returns (bytes32) {
        return INITIALIZABLE_STORAGE;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        bytes32 slot = _initializableStorageSlot();
        assembly {
            $.slot := slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {UpgradeableBeacon} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1967.sol)

pragma solidity ^0.8.20;

/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 */
interface IERC1967 {
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.2.0) (utils/Address.sol)

pragma solidity ^0.8.20;

import {Errors} from "./Errors.sol";

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert Errors.InsufficientBalance(address(this).balance, amount);
        }

        (bool success, bytes memory returndata) = recipient.call{value: amount}("");
        if (!success) {
            _revert(returndata);
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {Errors.FailedCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert Errors.InsufficientBalance(address(this).balance, value);
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case
     * of an unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {Errors.FailedCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            assembly ("memory-safe") {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert Errors.FailedCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC-1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * TIP: Consider using this library along with {SlotDerivation}.
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct Int256Slot {
        int256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Int256Slot` with member `value` located at `slot`.
     */
    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns a `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }
}

{
  "remappings": [
    "@axelar-network/=lib/axelar-gmp-sdk-solidity/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "axelar-gmp-sdk-solidity/=lib/axelar-gmp-sdk-solidity/contracts/",
    "ds-test/=lib/solmate/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "halmos-cheatcodes/=lib/openzeppelin-contracts-upgradeable/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "solmate/=lib/solmate/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "viaIR": true,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"admin","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AccessControlBadConfirmation","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bytes32","name":"neededRole","type":"bytes32"}],"name":"AccessControlUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"requiredTokenIn","type":"address"},{"indexed":false,"internalType":"uint256","name":"suppliedAmountIn","type":"uint256"},{"indexed":true,"internalType":"address","name":"requiredTokenOut","type":"address"},{"indexed":false,"internalType":"uint256","name":"swapAmountOut","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"maxPreTip","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"maxPostTip","type":"uint256"}],"name":"SwapAndTip","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"RELAYER_EOA_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call[]","name":"preCalls","type":"tuple[]"},{"internalType":"contract DaimoPay","name":"dp","type":"address"},{"components":[{"internalType":"uint256","name":"toChainId","type":"uint256"},{"components":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TokenAmount[]","name":"bridgeTokenOutOptions","type":"tuple[]"},{"components":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TokenAmount","name":"finalCallToken","type":"tuple"},{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call","name":"finalCall","type":"tuple"},{"internalType":"address payable","name":"escrow","type":"address"},{"internalType":"contract IDaimoPayBridger","name":"bridger","type":"address"},{"internalType":"address","name":"refundAddress","type":"address"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"uint256","name":"expirationTimestamp","type":"uint256"}],"internalType":"struct PayIntent","name":"intent","type":"tuple"},{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call[]","name":"claimCalls","type":"tuple[]"},{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call[]","name":"postCalls","type":"tuple[]"},{"internalType":"bytes32","name":"swapAndTipHash","type":"bytes32"}],"name":"claimAndKeep","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract DaimoPay","name":"dp","type":"address"},{"components":[{"internalType":"uint256","name":"toChainId","type":"uint256"},{"components":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TokenAmount[]","name":"bridgeTokenOutOptions","type":"tuple[]"},{"components":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TokenAmount","name":"finalCallToken","type":"tuple"},{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call","name":"finalCall","type":"tuple"},{"internalType":"address payable","name":"escrow","type":"address"},{"internalType":"contract IDaimoPayBridger","name":"bridger","type":"address"},{"internalType":"address","name":"refundAddress","type":"address"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"uint256","name":"expirationTimestamp","type":"uint256"}],"internalType":"struct PayIntent","name":"intent","type":"tuple"},{"components":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TokenAmount","name":"tokenIn","type":"tuple"},{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call[]","name":"calls","type":"tuple[]"}],"name":"fastFinish","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"relayer","type":"address"}],"name":"grantRelayerEOARole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"callerConfirmation","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call[]","name":"preCalls","type":"tuple[]"},{"internalType":"contract DaimoPay","name":"dp","type":"address"},{"components":[{"internalType":"uint256","name":"toChainId","type":"uint256"},{"components":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TokenAmount[]","name":"bridgeTokenOutOptions","type":"tuple[]"},{"components":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TokenAmount","name":"finalCallToken","type":"tuple"},{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call","name":"finalCall","type":"tuple"},{"internalType":"address payable","name":"escrow","type":"address"},{"internalType":"contract IDaimoPayBridger","name":"bridger","type":"address"},{"internalType":"address","name":"refundAddress","type":"address"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"uint256","name":"expirationTimestamp","type":"uint256"}],"internalType":"struct PayIntent","name":"intent","type":"tuple"},{"internalType":"contract IERC20[]","name":"paymentTokens","type":"address[]"},{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call[]","name":"startCalls","type":"tuple[]"},{"internalType":"bytes","name":"bridgeExtraData","type":"bytes"},{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call[]","name":"postCalls","type":"tuple[]"},{"internalType":"bytes32","name":"swapAndTipHash","type":"bytes32"}],"name":"startIntent","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TokenAmount","name":"requiredTokenIn","type":"tuple"},{"internalType":"uint256","name":"suppliedTokenInAmount","type":"uint256"},{"components":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TokenAmount","name":"requiredTokenOut","type":"tuple"},{"internalType":"uint256","name":"maxPreTip","type":"uint256"},{"internalType":"uint256","name":"maxPostTip","type":"uint256"},{"components":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct Call","name":"innerSwap","type":"tuple"}],"name":"swapAndTip","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawAmount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"withdrawBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0000000000000000000000002f321372e8a9755cd2ca6114eb8da32a14f8100b

-----Decoded View---------------
Arg [0] : admin (address): 0x2F321372E8A9755CD2Ca6114eB8da32A14F8100b

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 0000000000000000000000002f321372e8a9755cd2ca6114eb8da32a14f8100b